The output voltage depends from the power source connected to PSE. Passive PoE-Out up to 57 V - Works same as low voltage (up to 30 V) PoE-Out, but is also capable to deliver high voltage over PoE ports.PD resistance on spare pairs should have range from 3kΩ to 26.5kΩ. PoE-Out Standard for devices which supports input voltage up to 30 V. For PoE-out uses the same voltage as supplied to the PSE (Power Sourcing Equipment). Passive PoE-Out up to 30 V - PoE standard, which does not require negotiation between PSE (Power Sourcing Equipment) and PD (Powered Device).MikroTik devices can support some or all of the following PoE standards: If a device supports powering other devices using PoE-out, then it is recommended to use at least 18V as the input voltage, except for devices that support multiple output voltages (e.g. RJ45 mode B pinout for power distribution over spare pairs, where the PoE is passed trough pins 4,5 (+) and 7,8 (-). This page describes how PoE-Out ( Power over Ethernet) feature can be used on MikroTik devices with at least one PoE-Out interface. 5.1.2 Models with selectable voltage output.5.1.1 Models with dependant voltage output.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |